AI Powered Gate Management

Your residents already carry a FASTag. That is all your gate needs.

Most vendors charge close to ₹350 for a new RFID tag on every vehicle, then charge again on every move-in and every replacement windshield. Dwaar AI reads the FASTag already fixed to the glass for highway tolls. No new tag to buy, no new sticker to stick, and no cluttered windshield carrying stickers from three different vendors.

₹0Cost per vehicle tag
3Verification layers at every entry
7 daysAverage time to go live
Dwaar AI gate camera reading a car's FASTag and authorizing entry
The Problem With Proprietary Tags

Every plastic tag your residents buy is a tag Dwaar AI never asks for.

Run the numbers on a typical 300 home community with 1.8 vehicles per home. At roughly ₹350 a tag, the first rollout alone costs residents close to ₹1.9 lakh, paid straight out of their own pockets, not the RWA's budget. That is before a single resident moves out.

With 12 percent yearly turnover, the same community ends up buying close to 65 fresh tags every single year just to keep pace with move-ins. Over five years, residents have effectively paid for the same 540 vehicles more than once.

None of this shows up as a line item the committee approved. It shows up as complaints in the residents' WhatsApp group, usually the same week a new family moves in and is told to pay ₹350 before their car can enter.

The Real Costs

₹350 per tag, every time

Every new vehicle, every move-in and every lost tag becomes a fresh charge, paid directly by the resident and blamed on the RWA that chose the vendor.

A windshield that runs out of room

An old vendor's tag, a mall parking sticker and your current society's tag all compete for the same six inches of glass, and guards still have to guess which one is actually active.

One tag, one point of failure

If the tag peels off, fades or was never registered, most systems fall back to a guard waving the car through, with no second check in place at all.

Why Dwaar AI Is Built Differently

Three ways to verify every entry. Not one.

Most boom barrier vendors, including the ones running ads for RFID tags right now, verify a vehicle one way only: a paid tag. If that tag fails, the only backup is a guard's judgment. Dwaar AI stacks three independent checks, so the gate rarely, if ever, depends on a single signal.

Layer 01

FASTag Recognition

The RFID reader at your gate reads the same FASTag your residents already use on the highway. No enrollment drive, no new hardware to stick on the car, no fee per vehicle.

Layer 02

ANPR Camera Backup

If a FASTag is damaged, low on charge or simply not registered yet, the automatic number plate recognition camera reads the plate and checks it against your resident and vehicle records in real time.

Layer 03

Face Recognition

Residents walking in, domestic staff, delivery riders and guards on shift change are verified by face, so the system covers people, not only vehicles.

Side By Side

Dwaar AI next to a typical RFID boom barrier vendor.

 Typical RFID VendorDwaar AI
Cost per vehicle tagAround ₹300 to ₹350₹0, uses the FASTag already on the vehicle
Cost when a resident moves inA new tag is purchased againNo new tag, ever
Windshield stickersOne more sticker added to the glassZero additional stickers
Verification layersRFID tag onlyFASTag, ANPR camera and face recognition together
If the tag is damaged or unreadGuard opens the gate manually, no automatic checkANPR camera reads the plate automatically as backup
Entry without a vehicleNot coveredFace recognition covers walking residents and staff
Average go live timeVaries, often weeks of tag distribution7 days
For Your Management Committee

See what proprietary RFID tags actually cost your residents.

Enter your community's numbers below. This is the same calculator our sales team uses on every call, so the figures you get here are the same ones you will see in a proposal.

Rs

Residents pay, proprietary tag system

Rs 0

Residents pay with Dwaar AI

Rs 0

What your residents keep instead of paying for tags

Rs 0

over the period you selected

Get an Exact Quote for Your Community

Figures are indicative and based on the values you enter. Two wheelers are covered by number plate recognition, so no tag is needed on Dwaar AI regardless of vehicle type.

The Plan

From sign-up to a working gate in 7 days.

No tag distribution drive, no residents queueing at the security office, no weeks of downtime.

1

Share your vehicle list

Send us your existing resident and vehicle records so we know which FASTags to expect at the gate.

2

We map FASTags in parallel

Your current barrier keeps running while we test FASTag reads in the background, so residents notice nothing.

3

Cameras go up

ANPR and face recognition cameras are installed and calibrated to your gate's angle and lighting.

4

Guards get trained

One session on the Nazar guard app covers overrides, manual entries and shift handovers.

5

You go live in 7 days

The old barrier stays on standby for the first week as a safety net while the team monitors every entry.

Built For

Wherever a barrier stands between a car and a gate.

Dwaar AI camera and kiosk verifying a resident vehicle at a gated residential community entrance

Gated Residential Community

Every resident vehicle recognised automatically, visitor and delivery entries approved from the Basera app, no manual registers at the gate.

Dwaar AI camera and kiosk verifying an employee vehicle at a corporate tech park entrance

Corporate or Tech Park

Employee and contractor vehicles verified without a security desk queue, with full entry and exit logs for facility audits.

Dwaar AI camera and kiosk verifying a resident vehicle at a standalone apartment building entrance at night

Standalone Apartment Building

A single entry point covered by all three verification layers, sized for a building with one gate and a small guard team.

Frequently Asked Questions

Questions every committee asks before switching.

No. Dwaar AI reads the FASTag already fixed to the windshield for highway tolls. There is no new tag to buy, no installation fee per vehicle and nothing new to stick on the glass.

The ANPR camera at the gate reads the number plate automatically and checks it against your resident records, so entry does not depend on one working tag. If both checks are inconclusive, the guard can verify manually and grant entry.

Most vendors verify a vehicle one way only, through a paid RFID tag. Dwaar AI checks every entry through three independent layers, FASTag, ANPR camera and face recognition, so a single failure point does not stop the gate from working correctly.

No. The gate recognises a registered vehicle automatically through FASTag or ANPR. The resident app is useful for visitor approvals and vehicle updates, but it is not required for daily entry.

They can stay or be peeled off, it makes no difference to Dwaar AI. We do not add another sticker to the glass. Once a vehicle is registered against its FASTag or number plate, no physical tag is needed at all.

Most communities are live within 7 days. Your existing barrier keeps operating normally while we install cameras and calibrate FASTag reads in parallel, so residents are never left without an entry point.

No. Once setup is complete, there is no per-vehicle tag cost and no per-entry charge. Pricing is based on the community, not on how many cars pass through the gate or how many residents move in and out.

Yes. Automation handles routine, verified entries, but the guard can override at any step through the Nazar guard app. Every override is logged, so the committee always has a record of what happened and why.

Ready When You Are

Stop asking residents to pay for tags Dwaar AI does not need.

Book a 20 minute call and we will walk through your community's actual vehicle count, your current vendor's cost, and how quickly you can be live with FASTag, ANPR and face recognition working together.

Dwaar AI camera and kiosk recognising a resident's vehicle and approving gate entry at night